JORC SEPREMIUM · Advanced Condensate Treatment

SEPREMIUM Oil-Water Separators

The SEPREMIUM range separates oil from compressor condensate to 5 ppm output. Efficient, reliable, and compliant with ISO 14000 environmental management standards.

SEPREMIUM separator banner
Request Quote View Models

Universal Separation

Handles all compressor lubricants: mineral, synthetic, semi-synthetic, and emulsions.

Universal separation

High Performance

Multi-stage polypropylene and activated carbon filters achieve 5 ppm residue.

High performance

Easy Service

Lightweight elements, element-life indicator, and quick-change design ensure safe, fast maintenance.

Easy service

How SEPREMIUM Works

  • Condensate enters brass inlets (supports all drains)
  • Depressurisation chamber removes air
  • Primary polypropylene element adsorbs oil (indicator lowers)
  • Secondary element captures remaining oil
  • Carbon polisher ensures 5 ppm
Flow diagram of SEPREMIUM operation

Key Benefits

  • Element life & overflow indicators
  • Sample bottle & test valve
  • Lightweight ergonomic elements
  • Durable PE housing with brass threads
  • Origin: EU
Element life indicator illustration

SEPREMIUM Models

All SEPREMIUM models overview
ModelCompressor CapacityOil AdsorptionResidual Oil Content
SEPREMIUM 2iUp to 2 m³/min2 L<5 ppm
SEPREMIUM 4.5iUp to 4.5 m³/min5 L<5 ppm
SEPREMIUM 10iUp to 10 m³/min10 L<5 ppm
SEPREMIUM 20iUp to 20 m³/min15 L<5 ppm
SEPREMIUM 30iUp to 30 m³/min25 L<5 ppm
SEPREMIUM 60iUp to 60 m³/min50 L<5 ppm

Need help sizing? Send us your compressor details.

  • Compressor capacity (m³/min or kW)
  • Oil type (mineral, synthetic, emulsified)
  • Drain type (timer or level)

Frequently Asked Questions

1) Why can’t I discharge compressor condensate directly?

Because condensate contains oil and contaminants. Discharging untreated water pollutes the environment and risks fines. An oil-water separator ensures compliant, clean discharge.

2) Does SEPREMIUM work with all compressor oils?

Yes. It handles mineral, synthetic, semi-synthetic, polyglycol and even stable emulsions.

3) What outlet quality can I expect?

The SEPREMIUM range targets <5 ppm oil residue at the outlet under normal conditions (site dependent). For stricter local limits, size and configure accordingly.

4) How often do elements need replacement?

Typically every 6–12 months depending on condensate volume and oil type. The white element-life indicator shows when replacement is due.

5) How do we dispose of waste oil and used elements?

Use certified waste contractors per local regulations. Follow your site’s environmental management program (e.g., ISO 14000).

6) Can SEPREMIUM handle multiple compressors?

Yes. Install units in parallel and, where needed, use a DISTRIBUTOR to evenly split flows across separators for higher capacities and future expansion.

7) What does Vietnamese law require for oil content in discharged water?

New projects (after Sept 1, 2025): Under QCVN 40:2025/BTNMT, typical limits are ≤1 mg/L (Column A) or ≤5 mg/L (Column B/C). If no zone is specified, Column B (≤5 mg/L) generally applies.

Existing projects (approved before Sept 1, 2025): QCVN 40:2011/BTNMT may still apply until Dec 31, 2031 in many cases, with ≤5 mg/L (Column A) and ≤10 mg/L (Column B).

1 mg/L ≈ 1 ppm. Check your permit—local authorities can set stricter site-specific limits.

Contact Us

Submit the form or email us drawings/photos of your site.

    Contact Details

    IMX Technology Co., Ltd. · Authorized Distributor of JORC

    E: [email protected] · T: +84-0867 837 004

    Hours: Mon–Fri 8:00–17:00 (ICT, GMT+7)